Africa - Flat-Rolled Steel in Coils - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAfrica: Flat-Rolled Steel Coils Market 2024
Flat-Rolled Steel Coils Market Size in Africa
After two years of growth, the African flat-rolled steel coils market decreased by X% to $X in 2023. In general, consumption, however, continues to indicate a relatively flat trend pattern. The level of consumption peaked at $X in 2022, and then reduced in the following year.
Flat-Rolled Steel Coils Production in Africa
In value terms, flat-rolled steel coils production expanded rapidly to $X in 2023 estimated in export price. Overall, production, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 when the production volume increased by X%. Over the period under review, production attained the peak level at $X in 2018; however, from 2019 to 2023, production stood at a somewhat lower figure.
Flat-Rolled Steel Coils Exports
Exports in Africa
Flat-rolled steel coils exports skyrocketed to X tons in 2023, with an increase of X% against the year before. Total exports indicated a measured expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports increased by X% against 2020 indices. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. Over the period under review, the exports attained the maximum in 2023 and are expected to retain growth in years to come.
In value terms, flat-rolled steel coils exports surged to $X in 2023. Overall, exports saw a moderate expansion. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of $X; afterwards, it flattened through to 2023.
Exports by Country
Egypt prevails in exports structure, resulting at X tons, which was approx. X% of total exports in 2023. It was distantly followed by South Africa (X tons), generating a X% share of total exports. The following exporters - Libya (X tons) and Algeria (X tons) - each finished at a X% share of total exports.
Egypt was also the fastest-growing in terms of the flat-rolled steel in coils exports, with a CAGR of X% from 2012 to 2023. At the same time, Algeria (X%) and Libya (X%) displayed positive paces of growth. By contrast, South Africa (X%) illustrated a downward trend over the same period. From 2012 to 2023, the share of Egypt increased by X percentage points. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Egypt ($X) remains the largest flat-rolled steel coils supplier in Africa, comprising X% of total exports. The second position in the ranking was held by South Africa ($X), with a X% share of total exports. It was followed by Libya, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Egypt totaled X%. The remaining exporting countries recorded the following average annual rates of exports growth: South Africa (X% per year) and Libya (X% per year).
Export Prices by Country
In 2023, the export price in Africa amounted to $X per ton, which is down by X% against the previous year. Export price indicated slight growth from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. Over the period under review, the export prices hit record highs at $X per ton in 2022, and then declined significantly in the following year.
Average prices varied somewhat amongst the major exporting countries. In 2023, major exporting countries recorded the following prices: in Libya ($X per ton) and South Africa ($X per ton), while Algeria ($X per ton) and Egypt ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Libya (X%), while the other leaders experienced more modest paces of growth.
Flat-Rolled Steel Coils Imports
Imports in Africa
In 2023, supplies from abroad of flat-rolled steel in coils decreased by X% to X tons, falling for the third year in a row after two years of growth. The total import volume increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2014 when imports increased by X% against the previous year. The volume of import peaked at X tons in 2015; however, from 2016 to 2023, imports failed to regain momentum.
In value terms, flat-rolled steel coils imports shrank to $X in 2023. Total imports indicated a moderate increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 with an increase of X%. The level of import peaked at $X in 2022, and then dropped in the following year.
Imports by Country
Egypt (X tons) and Kenya (X tons) were the main importers of flat-rolled steel in coils in 2023, accounting for approx. X% and X% of total imports, respectively. It was distantly followed by Tanzania (X tons), South Africa (X tons), Algeria (X tons) and Tunisia (X tons), together mixing up a X% share of total imports. Uganda (X tons), Sudan (X tons), Djibouti (X tons), Ethiopia (X tons), Ghana (X tons), Angola (X tons) and Mozambique (X tons) followed a long way behind the leaders.
From 2012 to 2023, the biggest increases were recorded for Mozambique (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest flat-rolled steel coils importing markets in Africa were Egypt ($X), Kenya ($X) and Tanzania ($X), together comprising X% of total imports. South Africa, Algeria, Tunisia, Sudan, Uganda, Djibouti, Ethiopia, Ghana, Angola and Mozambique lagged somewhat behind, together accounting for a further X%.
Mozambique, with a CAGR of X%, recorded the highest growth rate of the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Africa stood at $X per ton in 2023, dropping by X% against the previous year. Overall, the import price, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, import prices attained the maximum at $X per ton in 2022, and then contracted in the following year.
Average prices varied somewhat amongst the major importing countries. In 2023, major importing countries recorded the following prices: in Sudan ($X per ton) and Ethiopia ($X per ton), while Tanzania ($X per ton) and Tunisia ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Kenya (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the flat-rolled steel coils market in Africa. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103310 - Hot-rolled flat products in coil for rerolling of a width of .600 mm or more, of stainless steel
- Prodcom 24103320 - Other hot-rolled flat products in coil of a width of .600 mm or more, of stainless steel
- Prodcom 24103410 - Hot-rolled flat products in coil for rerolling of a width of less than .600 mm, of stainless steel
- Prodcom 24103420 - Other hot-rolled flat products in coil of a width of less than .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24104110 - Uncoated cold-rolled sheet, plate and strip of a width . .600 mm, of steel other than stainless steel
- Prodcom 24104130 - Electrical sheet and strip not finally annealed of a width of .600 mm or more
- Prodcom 24104150 - Electrical sheet and strip, grain non-oriented of a width . .600 mm
Country coverage:
- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cabo Verde
- Cameroon
- Central African Republic
- Chad
- Comoros
- Congo
- Cote d'Ivoire
- Democratic Republic of the Congo
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Reunion
- Rwanda
- Saint Helena, Ascension and Tristan da Cunha
- Sao Tome and Principe
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- South Sudan
- Sudan
- Swaziland
- Tanzania
- Togo
- Tunisia
- Uganda
- Western Sahara
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Africa, split by region and country
- Trade (exports and imports) in Africa
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cabo Verde
- Cameroon
- Central African Republic
- Chad
- Comoros
- Congo
- Democratic Republic of the Congo
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Reunion
- Rwanda
- Saint Helena, Ascension and Tristan da Cunha
- Sao Tome and Principe
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- Sudan
- Swaziland
- Tanzania
- Togo
- Tunisia
- Uganda
- Zambia
- Zimbabwe
- Cote d'Ivoire
- Western Sahara
- South Sudan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the flat-rolled steel coils market in Asia.
This report provides an in-depth analysis of the flat-rolled steel coils market in the U.S..
This report provides an in-depth analysis of the flat-rolled steel coils market in China.
This report provides an in-depth analysis of the flat-rolled steel coils market in the EU.
This report provides an in-depth analysis of the global flat-rolled steel coils market.
- Flat-Rolled Steel Coils Market
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market