Denmark - Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingDenmark: Market for Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips 2024
Market Size for Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in Denmark
For the third consecutive year, the Danish market for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips recorded growth in sales value, which increased by X% to $X in 2022. Over the period under review, the total consumption indicated notable growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2016 indices. Over the period under review, the market reached the peak level in 2022 and is likely to see steady growth in the near future.
Production of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips in Denmark
In value terms, production of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips declined sharply to $X in 2022 estimated in export price. Over the period under review, production showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2014 with an increase of X%. Production of peaked at $X in 2021, and then declined notably in the following year.
Exports of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips
Exports from Denmark
After two years of growth, overseas shipments of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips decreased by X% to X tons in 2022. In general, exports recorded a perceptible decline. The most prominent rate of growth was recorded in 2018 when exports increased by X% against the previous year. Over the period under review, the exports of reached the peak figure at X tons in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
In value terms, exports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips dropped sharply to $X in 2022. Overall, exports continue to indicate a slight slump. The most prominent rate of growth was recorded in 2018 with an increase of X% against the previous year. Over the period under review, the exports of hit record highs at $X in 2021, and then shrank dramatically in the following year.
Exports by Country
Sweden (X tons), Norway (X tons) and Germany (X tons) were the main destinations of exports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips from Denmark, together accounting for X% of total exports. Lithuania, China, the United States, Faroe Islands, the UK and Finland lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Faroe Islands (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest markets for unmounted tool inserts, sticks or plates exported from Denmark were China ($X), Sweden ($X) and Germany ($X), together accounting for X% of total exports. The United States, Norway, the UK, Finland, Faroe Islands and Lithuania lagged somewhat behind, together accounting for a further X%.
Among the main countries of destination, Faroe Islands, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average export price for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips stood at $X per ton in 2022, which is down by X% against the previous year. In general, the export price, however, saw slight growth. The pace of growth appeared the most rapid in 2020 when the average export price increased by X% against the previous year. As a result, the export price attained the peak level of $X per ton. From 2021 to 2022, the average export prices remained at a somewhat lower figure.
There were significant differences in the average prices for the major export markets. In 2022, amid the top suppliers, the country with the highest price was China ($X per ton), while the average price for exports to Lithuania ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to China (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Unmounted Tool Inserts, Sintered Metal Carbides or Cermet Plates, Sticks, Tips
Imports into Denmark
In 2022, purchases abroad of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips increased by X% to X tons, rising for the seventh consecutive year after three years of decline. Over the period under review, imports recorded a prominent expansion. The pace of growth appeared the most rapid in 2018 with an increase of X% against the previous year. Imports peaked in 2022 and are likely to continue growth in the immediate term.
In value terms, imports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips reduced slightly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2020 when imports increased by X% against the previous year. Imports peaked at $X in 2021, and then fell modestly in the following year.
Imports by Country
Germany (X tons), the Netherlands (X tons) and Sweden (X tons) were the main suppliers of imports of unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips to Denmark, with a combined X% share of total imports. Italy, Belgium, Spain, Austria and South Korea lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Spain (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the Netherlands ($X), Sweden ($X) and Germany ($X) appeared to be the largest unmounted tool inserts, sticks or plates suppliers to Denmark, together accounting for X% of total imports. Belgium, Italy, Austria, South Korea and Spain lagged somewhat behind, together comprising a further X%.
Spain, with a CAGR of X%, saw the highest growth rate of the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average import price for unmounted tool inserts, sintered metal carbides or cermet plates, sticks, tips stood at $X per ton in 2022, which is down by X% against the previous year. Overall, the import price continues to indicate a abrupt slump. The pace of growth appeared the most rapid in 2014 an increase of X% against the previous year. As a result, import price attained the peak level of $X per ton. From 2015 to 2022, the average import prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Belgium ($X per ton), while the price for Spain ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Italy (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in Denmark. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25736067 - Indexable inserts for tools, unmounted, of sintered metal carbides and cermets
- Prodcom 25736090 - Unmounted sintered metal carbides or cermet plates, sticks, t ips and the like for tools (excluding indexable inserts)
Country coverage:
- Denmark
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Denmark
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in Asia.
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in the U.S..
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in China.
This report provides an in-depth analysis of the market for unmounted tool inserts, sticks or plates in the EU.
This report provides an in-depth analysis of the global market for unmounted tool inserts, sticks or plates.