EU - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in the EU
In 2023, the EU rubber-to-metal and moulded article market increased by X% to $X, rising for the seventh year in a row after three years of decline. The market value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. The level of consumption peaked in 2023 and is likely to continue growth in the near future.
Production of Rubber-to-Metal and Moulded Articles in the EU
In value terms, rubber-to-metal and moulded article production dropped to $X in 2023 estimated in export price. In general, production, however, continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the production volume increased by X%. Over the period under review, production attained the maximum level at $X in 2020; afterwards, it flattened through to 2023.
Exports of Rubber-to-Metal and Moulded Articles
Exports in the EU
In 2023, the amount of rubber-to-metal and moulded articles exported in the European Union reduced slightly to X tons, remaining constant against the year before. The total export volume increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained consistent, with only minor fluctuations being observed throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when exports increased by X%. Over the period under review, the exports attained the maximum at X tons in 2018; however, from 2019 to 2023, the exports remained at a lower figure.
In value terms, rubber-to-metal and moulded article exports rose rapidly to $X in 2023. The total export value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. The level of export peaked in 2023 and is expected to retain growth in the near future.
Exports by Country
Germany (X tons) and Poland (X tons) were the largest exporters of rubber-to-metal and moulded articles in 2023, amounting to near X% and X% of total exports, respectively. It was distantly followed by Italy (X tons), Spain (X tons), Romania (X tons), the Czech Republic (X tons), Slovakia (X tons), the Netherlands (X tons) and France (X tons), together generating a X% share of total exports.
From 2012 to 2023, the biggest increases were recorded for the Netherlands (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest rubber-to-metal and moulded article supplier in the European Union, comprising X% of total exports. The second position in the ranking was held by Poland ($X), with an X% share of total exports. It was followed by Italy, with an X% share.
From 2012 to 2023, the average annual growth rate of value in Germany stood at X%. In the other countries, the average annual rates were as follows: Poland (X% per year) and Italy (X% per year).
Export Prices by Country
In 2023, the export price in the European Union amounted to $X per ton, picking up by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. As a result, the export price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was France ($X per ton), while Poland ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by France (X%), while the other leaders experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports in the EU
In 2023, supplies from abroad of rubber-to-metal and moulded articles increased by X% to X tons, rising for the third consecutive year after two years of decline. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 when imports increased by X%. The volume of import peaked in 2023 and is expected to retain growth in years to come.
In value terms, rubber-to-metal and moulded article imports totaled $X in 2023. The total import value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. The level of import peaked in 2023 and is likely to continue growth in the immediate term.
Imports by Country
Germany represented the largest importer of rubber-to-metal and moulded articles in the European Union, with the volume of imports recording X tons, which was near X% of total imports in 2023. France (X tons) held the second position in the ranking, followed by Italy (X tons), Belgium (X tons), the Czech Republic (X tons), Poland (X tons), Spain (X tons) and the Netherlands (X tons). All these countries together took approx. X% share of total imports. The following importers - Slovakia (X tons), Hungary (X tons), Austria (X tons), Sweden (X tons) and Romania (X tons) - each recorded a X% share of total imports.
From 2012 to 2023, average annual rates of growth with regard to rubber-to-metal and moulded article imports into Germany stood at X%. At the same time, Hungary (X%), Belgium (X%), Sweden (X%), Slovakia (X%), the Netherlands (X%), Italy (X%), Poland (X%), Romania (X%) and the Czech Republic (X%) displayed positive paces of growth. Moreover, Hungary emerged as the fastest-growing importer imported in the European Union, with a CAGR of X% from 2012-2023. Austria and France experienced a relatively flat trend pattern. By contrast, Spain (X%) illustrated a downward trend over the same period. Belgium (X p.p.) significantly strengthened its position in terms of the total imports, while France, Germany and Spain saw its share reduced by X%, X% and X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) constitutes the largest market for imported rubber-to-metal and moulded articles in the European Union, comprising X% of total imports. The second position in the ranking was held by France ($X), with a X% share of total imports. It was followed by Italy, with an X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Germany amounted to X%. In the other countries, the average annual rates were as follows: France (X% per year) and Italy (X% per year).
Import Prices by Country
In 2023, the import price in the European Union amounted to $X per ton, growing by X% against the previous year. Over the period under review, the import price saw a modest expansion. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Austria ($X per ton), while Belgium ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Spain (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.